DHCP option 43 generator
Build the vendor-specific option 43 value a wireless controller actually expects. One option number, four incompatible encodings.
RedesRuns entirely in your browser. A controller address is internal topology and never leaves this page.
API endpointGEThttps://ronutz.com/api/v1/dhcp-option-43Documented, not served. Opens the specification.
Referencias
- RFC 2132 section 8.4: Vendor Specific Information (option 43)
- Cisco: Configure DHCP OPTION 43 for Lightweight Access Points (document 97066)
- RUCKUS KB 000008703: Understanding DHCP Option 43 Hexadecimal code (sub-option 03 or 06, address as ASCII text)
- RUCKUS KB 000008703: sub-option 06 is typical for SmartZone (SCG) APs
- Ubiquiti: Layer 3 Adoption for Remote UniFi Controllers
- Extreme Networks: Configuring DHCP Option 43 (ExtremeCloud IQ Controller Deployment Guide)
- Extreme Networks: DHCP Option 43, Fabric Engine User Guide (sub-option 226, EXTREME.cloudiq-ip)
- HPE Aruba Networking: standard and vendor-specific DHCP options for access points
- Fortinet: FortiAP acquires the AC address from DHCP option 138 (factory default)
- RUCKUS Networks Community, How the APs discover the IP address of the controller (post by a RUCKUS Team Member; secondary source)
- RUCKUS Networks Community, AP Discovery: How to configure DHCP option 43 to discover the controller (post by a RUCKUS Team Member; secondary source)
- Cisco Code Exchange, cisco43calc README by Brett Verney (community repository; secondary source)